web analytics

forum forum Technical Clutch plate alignment tool

This topic contains 10 replies, has 6 voices, and was last updated by Richard and Pat Richard and Pat 4 months, 2 weeks ago.

  • Author
    Posts
  • #12351
    Richard and Pat
    Richard and Pat
    Participant

      Trikingistas,
      Does anyone have the above tool and can tell me the dimensions please? Or describe what you use. Cali EV 2002.
      Thanks
      Richard

    • #12352
      david
      david
      Participant

        I have used a wooden dowel and tight masking tape in the past..but not on a guzzi clutch…or you could get someone to turn one up for you…

        • #12355
          Richard and Pat
          Richard and Pat
          Participant

            Yes me too, using the valve regrinding handle but by the look of the item on the Gutsibits web site if I got the dims I could indeed turn one up.

        • #12353
          WestEndGuzzi
          WestEndGuzzi
          Keymaster

            I have (had) one of those tools but lent it out to someone.
            You are quite welcome to borrow it, just need to remember who I lent it to.

            • #12356
              Richard and Pat
              Richard and Pat
              Participant

                Thank you Tony, I am stripping the motor assembly at present so not needed for a week or two, no pressure. 🙂

            • #12354
              Oily
              Oily
              Participant

                I have one too, happy to post to you.

                • #12357
                  Richard and Pat
                  Richard and Pat
                  Participant

                    Thank you Oily,
                    Could you possibly measure and sketch and I’ll have a go at turning one up to save the possibility of a lost in the post scenario? I think you have my email address, if you can that would be most useful please.

                • #12359

                  Guzzitrike
                  Participant

                    Stein Dinse do one for 59 euros – https://www.stein-dinse.biz/Moto-Guzzi/Tools/Spezialwerkzeug:::1_52_344:2.html

                    or if you want cheaper buy a second hand boss.

                  • #12360
                    Richard and Pat
                    Richard and Pat
                    Participant

                      Thank you Guzzitrike,

                    • #12363
                      DSU475
                      DSU475
                      Participant

                        Hi Richard,
                        I have Tony’s alignment tool, he kindly sent it to me. I haven’t used it yet due to waiting for my friction plates to be relined locally and now a bout of flu. I attach a picture of the tool and a sketch with dimensions . You will see on the tool itself that there are three splines protruding from the outer circumference at 120 degree intervals.

                        Attachments:
                        You must be logged in to view attached files.
                      • #12367
                        Richard and Pat
                        Richard and Pat
                        Participant

                          Perfect thank you Andy.

                        You must be logged in to reply to this topic.