Starter Removal? forum › forum › Technical › Starter Removal? This topic contains 3 replies, has 3 voices, and was last updated by Algernon Shufflepipe 1 month ago. Author Posts 17/04/2018 at 3:22 am #12625 bdaughdrillParticipant Have a 1999 Basra (1100) sitting in the engine cradle and find myself needing to pull starter so I can access neutral switch. Is that a doable job without removing engine/tranny from car? 17/04/2018 at 6:41 am #12626 davidParticipant yes it is possible but fiddly.you need long socket extension and disconnect battery first… remember how it comes out -fiddly then it goes back in reverse… 18/04/2018 at 2:03 am #12636 bdaughdrillParticipant fiddly….perfect. thanks. Always something. 18/04/2018 at 7:54 am #12637 Algernon ShufflepipeParticipant Once you have removed the 2 x 13 mm bolts ,it should just slide out backwards with no issues. Algernon. Author Posts You must be logged in to reply to this topic.