Scroll down the page to find guides , click on each picture to enlarge.

Polyurethane Suspension Bushes Fitting Arrangment

This photo shows the orientation for the front wishbone suspension bushes studs and washers. In the case of an installation using non self locking nuts we fit spring washers and apply a threadlock compound to the threads.


Under the bonnet

A selection of pictures showing a general representation of under the bonnet layout.


Setting Front Wheel Alignment

A simple method of setting tracking  is to measure between the tyres. The foremost measurement when measured as shown should be 3mm less than the rearmost measurement.


Rear of wheel measurement









Triking Schematic Diagram For Fuel Injection